ADS-2700W
![]() |
FAQs & Troubleshooting |
Your Scanner Cannot Be Detected on the Network During Installation
Cause | Action | Interface |
---|
Your computer is not connected to the network. | Make sure your computer is connected to a network, for example, a LAN environment or Internet services. For further support, contact your network administrator. | Wired/Wireless |
Your machine is not connected to the network. | (Wired network) Press (Wireless network) Press | Wired/Wireless |
You use security software. |
| Wired/Wireless |
You use a Wi-Fi router. | The privacy separator on your Wi-Fi router may be enabled. Disable the privacy separator. | Wireless |
Your Brother machine is placed too far from the Wireless access point/router. | Place your Brother machine within about 3.3 feet (1 meter) of the Wireless access point/router when you configure the wireless network settings. | Wireless |
There are some obstructions (walls or furniture, for example) between your machine and the Wireless access point/router. | Move your Brother machine to an obstruction-free area, or closer to the Wireless access point/router. | Wireless |
There is a wireless computer, Bluetooth-supported device, microwave oven, or digital cordless phone near the Brother machine or the Wireless access point/router. | Move all the devices away from the Brother machine or Wireless access point/router. | Wireless |
Content Feedback
To help us improve our support, please provide your feedback below.