FAQs & Troubleshooting
![]() |
Popular |
149 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 3How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 4Combination of fabric, thread and needle
- 5How to use the Multi-purpose Screwdriver.
- 6When thread got tangled.
- 7Fabric and Thread
- 8When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 9Why does the lower thread keep breaking?
- 10How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 11How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 12The bobbin thread cannot be pulled up.
- 13How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 14Where do I put the oil in my machine?
- 15How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 16How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 17How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 18How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 19How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
- 20"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 21The machine does not make stitches
- 22How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 23How do I create a space between characters?
- 24When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 25Embroidery
- 26How do I thread my machine ?
- 27"This USB media is incompatible." message appears on the LCD. What does it mean?
- 28How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 29How do I change the needle ?
- 30How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 31How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 32How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 33How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 34How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 35When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 36For better results when sewing stretch fabrics
- 37"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- 38"Failed to save file." message appears on the LCD. What does it mean?
- 39"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 40"Transmitting by USB" message appears on the LCD. What does it mean?
- 41Why does the needle keep breaking?
- 42How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 43How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 44How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 45How do I attach or remove the Embroidery Unit?
- 46How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 47How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 48How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 49How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 50How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]