FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2Color thread table
- 3How to set up the cap frame. [Video instructions]
- 4How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 5How to use the Round frame (PRPRFK1) [Video instructions]
- 6How to set up the cap frame driver. [Video instructions]
- 7How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 8How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 9How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 10How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 11"Preventive maintenance is recommended" appears on the LCD.
- 12Replacing the needle [Video instructions]
- 13Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 14The thread tension is incorrect.
- 15"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?
- 16Creating Beautiful Embroidery ( Hooping techniques )
- 17"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 18"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 19"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 20"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 21Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 22Embroidery pattern does not sew out correctly.
- 23The machine is noisy while embroidering.
- 24Loops appear on the surface of the fabric when embroidering.
- 25"This pattern cannot combine." message appears on the LCD. What does it mean?
- 26"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 27How do I use the embroidery sheet ?
- 28Colors of Tajima (.dst) embroidery data
- 29Maintenance (Oiling the machine)
- 30How do I thread the machine? (Threading the upper thread)
- 31Fabric/stabilizer compatibility chart
- 32LED pointer does not indicate the position correctly.
- 33Bobbin thread does not wind neatly on the bobbin.
- 34Upper thread tightened up.
- 35There is puckering in the fabric.
- 36There are needle cuts or holes in the garment.
- 37The bobbin thread breaks.
- 38"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 39"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 40"This pattern cannot be used." message appears on the LCD. What does it mean?
- 41"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 42"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 43"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 44"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 45"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 46"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 47"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 48"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 49How do I attach or remove the embroidery frame ?
- 50How do I change the needle?