FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 2How to set up the cap frame. [Video instructions]
- 3How to Embroider on Cap. [Video instructions]
- 4How to set up the cap frame driver. [Video instructions]
- 5How to Embroider on Shoes. [Video instructions]
- 6How to Embroider on Bag. [Video instructions]
- 7When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 8Color thread table
- 9Embroidery pattern does not sew out correctly.
- 10Creating Beautiful Embroidery ( Hooping techniques )
- 11How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 12How do I use the embroidery sheet ?
- 13Colors of Tajima (.dst) embroidery data
- 14How to Embroider on Pet Collar. [Video instructions]
- 15Maintenance (Cleaning around the needle plate)
- 16Maintenance (Oiling the machine)
- 17Maintenance (Clean the hook)
- 18Loops appear on the surface of the fabric when embroidering.
- 19"This pattern cannot be used." message appears on the LCD. What does it mean?
- 20How do I attach or remove the embroidery frame ?
- 21The machine is noisy while embroidering.
- 22How do I adjust the tension of the upper thread ?
- 23How do I adjust the tension of the bobbin thread ?
- 24How do I resume embroidering after turning off the machine ?
- 25What is DST ?
- 26Maintenance (Cleaning the bobbin case)
- 27"Preventive maintenance is recommended" appears on the LCD.
- 28"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 29"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 30"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 31"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 32Maintenance (Cleaning the thread paths of the upper threads)
- 33"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 34"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 35"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 36"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 37How do I embroider on small pieces of fabric ?
- 38How do I embroider on large pieces of fabric or heavy clothing ?
- 39Creating Beautiful Embroidery (Threads)
- 40Why does the needle keep breaking?
- 41How do I install the bobbin wound with thread?
- 42Stabilizers (Backing)
- 43Nothing happens, even if the LCD display is pressed.
- 44There is puckering in the fabric.
- 45"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 46"Trimming sensor error." message appears on the LCD. What does it mean?
- 47"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 48"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 49"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 50How do I attach Iron-On Stabilizer (Backing) to Fabric ?