FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to Embroider on Shoes. [Video instructions]
- 2How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 3How to Embroider on Cap. [Video instructions]
- 4How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 5How to set up the cap frame. [Video instructions]
- 6How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 7How to set up the cap frame driver. [Video instructions]
- 8How to Embroider on Clothes. [Video instructions]
- 9Maintenance (Oiling the machine) [ Video ]
- 10How to use the the versatile magnetic frame [Video instructions]
- 11How to Embroider on Pet Collar. [Video instructions]
- 12How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 13How to use the Round frame (PRPRFK1) [Video instructions]
- 14How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 15How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 16How to Embroider on Bag. [Video instructions]
- 17Maintenance (Cleaning the bobbin case) [ Video ]
- 18Maintenance (Cleaning around the needle plate) [ Video ]
- 19Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 20Maintenance (Clean the hook) [ Video ]
- 21"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 22How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 23There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 24Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 25Maintenance (Oiling the machine)
- 26Maintenance (Clean the hook)
- 27Stabilizers (Backing)
- 28Embroidery
- 29Maintenance (Cleaning around the needle plate)
- 30"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 31"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 32Maintenance (Cleaning the bobbin case)
- 33Fabric/stabilizer compatibility chart
- 34"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 35"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 36How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 37"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 38Fabric and Thread
- 39When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 40"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 41"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 42"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 43"Trimming sensor error." message appears on the LCD. What does it mean?
- 44"This file cannot be used." message appears on the LCD. What does it mean?
- 45Maintenance (Cleaning the thread paths of the upper threads)
- 46"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 47"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 48"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 49When thread got tangled
- 50How do I thread the machine? (Threading the upper thread)