FAQs & Troubleshooting
Popular |
71 Results
- 1How to set up the cap frame. [Video instructions]
- 2Why is the outline sewing off the pattern?
- 3How do I thread my machine (Threading the upper thread). [Video instructions]
- 4How to set up the cap frame driver. [Video instructions]
- 5How do I thread the needle. [Video instructions]
- 6There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 7Fabric and Thread
- 8Fabric/stabilizer compatibility chart
- 9Embroidery
- 10How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 11"Inappropriate needle stop position." message appearing on the LCD. What does it mean and how do I clear it?
- 12"Preventive maintenance is recommended" appears on the LCD.
- 13Maintenance (Oiling the machine)
- 14Why won't the tension set on my sewing machine?
- 15How do I thread the machine? (Threading the upper thread)
- 16Recommendation accessories
- 17"Cannot format." message appearing on the LCD. What does it mean and how do I clear it?
- 18"Floppy disk write protect." message appearing on the LCD. What does it mean and how do I clear it?
- 19How do I install the bobbin wound with thread
- 20When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 21"Change to the big frame." message appearing on the LCD. What does it mean and how do I clear it?
- 22"Save error." message appearing on the LCD. What does it mean and how do I clear it?
- 23"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 24Stabilizers (Backing)
- 25When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
- 26How do I confirm Windows98SE?
- 27Maintenance (Cleaning the bobbin case)
- 28"The selected embroidery pattern exceeds size of the frame." message appearing on the LCD. What does it mean and how do I clear it?
- 29"Pattern is too large." message appearing on the LCD. What does it mean and how do I clear it?
- 30"Check if lower thread is broken." message appearing on the LCD. What does it mean and how do I clear it?
- 31Why cannot the needle threader be used?
- 32Why does my thread keep jamming?
- 33How do I create a space between characters?
- 34"Too many colors." message appearing on the LCD. What does it mean and how do I clear it?
- 35"Embroidery card read error." message appearing on the LCD. What does it mean and how do I clear it?
- 36"Floppy disk read error." message appearing on the LCD. What does it mean and how do I clear it?
- 37"Check if thread is broken." message appearing on the LCD. What does it mean and how do I clear it?
- 38"Needle case motor has been locked." message appearing on the LCD. What does it mean and how do I clear it?
- 39Why does the upper thread keep breaking?
- 40When thread got tangled
- 41Place a spool of thread on a spool pin
- 42Hooping the Fabric
- 43"The thread number is invalid." message appearing on the LCD. What does it mean and how do I clear it?
- 44"Needle threader is in threading position." message appearing on the LCD. What does it mean and how do I clear it?
- 45"This pattern contains too much data to be stored." message appearing on the LCD. What does it mean and how do I clear it?
- 46"Pocket read error." message appearing on the LCD. What does it mean and how do I clear it?
- 47"USB read error." message appearing on the LCD. What does it mean and how do I clear it?
- 48"CompactFlash Card erase error." message appearing on the LCD. What does it mean and how do I clear it?
- 49"CompactFlash card read error." message appearing on the LCD. What does it mean and how do I clear it?
- 50"Needle bar case home position error." message appearing on the LCD. What does it mean and how do I clear it?