FAQs & Troubleshooting
Popular |
42 Results
- 1How to set up the cap frame. [Video instructions]
- 2How to set up the cap frame driver. [Video instructions]
- 3How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 4"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 5How do I thread my machine (Threading the upper thread). [Video instructions]
- 6How do I thread the needle. [Video instructions]
- 7Maintenance (Oiling the machine) [ Video ]
- 8There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 9Maintenance (Cleaning the bobbin case) [ Video ]
- 10Colors of Tajima (.dst) embroidery data
- 11Embroidery
- 12Fabric and Thread
- 13Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 14Maintenance (Cleaning around the needle plate) [ Video ]
- 15How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 16Why is the outline sewing off the pattern?
- 17Maintenance (Clean the hook) [ Video ]
- 18Fabric/stabilizer compatibility chart
- 19Hooping the Fabric
- 20Maintenance (Oiling the machine)
- 21Why won't the tension set on my sewing machine?
- 22Recommendation accessories
- 23"USB media error" message appears on the LCD. What does it mean?
- 24Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 25How do I create a space between characters?
- 26When thread got tangled
- 27How do I thread the machine? (Threading the upper thread)
- 28How do I install the bobbin wound with thread
- 29When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 30How do I change the volume of operation sounds or alarm sounds?
- 31Maintenance (Cleaning the thread paths of the upper threads)
- 32Maintenance (Clean the hook)
- 33Why does the upper thread keep breaking?
- 34Why does the needle keep breaking?
- 35Stabilizers (Backing)
- 36"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 37Maintenance (Cleaning the bobbin case)
- 38Why cannot the needle threader be used?
- 39Why won't the machine pick up the bobbin thread?
- 40Place a spool of thread on a spool pin
- 41Maintenance (Cleaning around the needle plate)
- 42Why does my thread keep jamming?