FAQs & Troubleshooting
![]() |
Popular |
43 Results
- 1Combination of fabric, thread and needle
- 2An "E1" message appears on the panel.
- 3Incorrect thread tension
- 4How do I sew buttonholes?
- 5Fabric and Thread
- 6An "E6" message appears on the panel.
- 7An "E5" message appears on the panel.
- 8How do I clean the machine? (Cleaning the race)
- 9It is difficult to pass the thread through the needle bar thread guide(hook).
- 10How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 11The bobbin thread cannot be pulled up.
- 12The machine does not make stitches
- 13How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 14Tangled thread on wrong side of fabric
- 15Place a spool of thread on a spool pin.
- 16An "E4" message appears on the panel.
- 17How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 18Where do I put the oil in my machine?
- 19How do I thread my machine? (Threading the needle manually [without using the needle threader])
- 20How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 21How do I wind the bobbin?
- 22The thread tension is incorrect.
- 23How do I sew such as vinyl, leather, quilting layers and velvet?
- 24Why does the lower thread keep breaking?
- 25How do I sew an applique?
- 26How do I correctly install a bobbin?
- 27Upper thread tightened up
- 28Upper threading (Point)
- 29How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)
- 30How do I wind the bobbin? (For models equipped with the fast bobbin winding system)
- 31How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 32F** or "F*" appears on the LCD. What does it mean?
- 33For better results when sewing stretch fabrics
- 34Why does the needle keep breaking?
- 35Why won't the machine pick up the bobbin thread?
- 36How do I sew a blind hem?
- 37When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 38An "E2" message appears on the panel.
- 39Why does my thread keep jamming?
- 40Why does the upper thread keep breaking?
- 41When thread got tangled.
- 42An "E3" message appears on the panel.
- 43How do I remove or attach the presser foot holder?