FAQs & Troubleshooting
![]() |
Popular |
38 Results
- 1How do I sew with the twin needle?
- 2Basic operations and sewing [Video instructions]
- 3Winding the bobbin and lower thread setting [Video instructions]
- 4How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 5Maintenance [Video instructions]
- 6Replacing the needle [Video instructions]
- 7Reverse sewing [Video instructions]
- 8Zipper insertion [Video instructions]
- 9Satin Stitching [Video instructions]
- 10How do I clean the machine? (Cleaning the race)
- 11Combination of fabric, thread and needle
- 12How do I remove or attach the presser foot ?
- 13Fabric is caught in the machine and cannot be removed
- 14How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 15Fabric and Thread
- 16Tangled thread on wrong side of fabric
- 17Incorrect thread tension
- 18How do I install the bobbin wound with thread? (For models equipped with a quick-set bobbin)
- 19How do I wind the bobbin?
- 20The machine does not make stitches
- 21Upper threading [Video instructions]
- 22Where do I put the oil in my machine?
- 23When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 24The bobbin thread cannot be pulled up.
- 25How do I draw up the lower thread by hand? (For models equipped with a quick-set bobbin.)
- 26Thread tension [Video instructions]
- 27Start sewing [Video instructions]
- 28How do I thread my machine?
- 29How do I sew such as vinyl, leather, quilting layers and velvet?
- 30How do I change the needle ?
- 31How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 32Upper thread tightened up
- 33Buttonhole sewing [Video instructions]
- 34Why does the lower thread keep breaking?
- 35Can I lower the feed dogs so that my machine doesn't feed fabric automatically?
- 36Setting up the sewing machine [Video instructions]
- 37Why does the needle keep breaking?
- 38How do I remove or attach the presser foot holder?