FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 3How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 4How to use the Round frame (PRPRFK1) [Video instructions]
- 5Color thread table
- 6How to set up the cap frame. [Video instructions]
- 7How to set up the cap frame driver. [Video instructions]
- 8How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 9Replacing the needle [Video instructions]
- 10How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 11How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 12The thread tension is incorrect.
- 13What is DST ?
- 14How do I attach or remove the embroidery frame ?
- 15How do I use the embroidery sheet ?
- 16"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 17Embroidery pattern does not sew out correctly.
- 18"Preventive maintenance is recommended" appears on the LCD.
- 19"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
- 20Stitches are skipped.
- 21The machine is noisy while embroidering.
- 22"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 23How do I wind the bobbin?
- 24Stabilizers (Backing)
- 25Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 26There are needle cuts or holes in the garment.
- 27Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 28Colors of Tajima (.dst) embroidery data
- 29Maintenance (Cleaning the bobbin case)
- 30Although the thread is not broken, a broken thread error occurs and the machine stops.
- 31"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 32When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 33"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 34How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 35Why does the upper thread keep breaking?
- 36Nothing happens, even if the LCD display is pressed.
- 37"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 38"This USB media cannot be used." message appears on the LCD. What does it mean?
- 39"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 40"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 41"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 42"Can not recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean and how do I clear it?
- 43How do I embroider on small pieces of fabric ?
- 44How do I embroider on large pieces of fabric or heavy clothing ?
- 45How do I change the needle?
- 46How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 47How do I adjust the tension of the bobbin thread ?
- 48Maintenance (Oiling the machine)
- 49Maintenance (Clean the hook)
- 50How do I install the bobbin wound with thread?