FAX-2440C
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/fax2440c_us_eu.jpg)
FAX-2440C
Date: 07/14/2011 ID: faq00002123_011
I'm using Voice Over Internet Protocol (VoIP) and am having problems sending faxes. What can I do?
Voice Over Internet Protocol (VoIP) is a type of phone system that uses an internet connection instead of a traditional phone line.
Although your Brother machine does not support the use of VoIP, the sending problem you are experiencing may not be related to your VoIP service. You should verify your telephone line connection, paper feeding process, and machine functionality before making any adjustments related to the VoIP service.
- Press the SPEAKER PHONE or HOOK key on the Brother machine's control panel and listen for a dial tone.
- One end of the telephone line MUST be connected to the jack on the Brother machine labeled LINE.
When using VoIP, the other end of the telephone line may be connected to a modem, interface box, phone adapter, splitter, etc. This is determined by your VoIP provider.
- If you corrected the line connection, press the SPEAKER PHONE or HOOK key after connecting the line cord correctly and listen for a dial tone.
- Verify the date and time are displayed on the LCD.
- If the date and time show on the LCD, go to STEP 6.
- If the LCD displays an error message (for example, "Paper Jam") or status message (for example, "Ink Low"), refer to the solution for the message that is appearing on the LCD.
- If the LCD is blank:
- Verify the power cord is connected to the AC power outlet and the back of the Brother machine.
If the power cord is connected to a surge protector or power switch, remove the cord from the device and connect it directly to the outlet to determine whether the issue is related to an external device or the Brother machine.
Brother strongly recommends that you connect your machine to a surge protector to protect it from power surges and lightning. In particular, we suggest that you use a surge protector that is compatible with both standard AC power cords and telephone line cords. Surge protectors equipped with telephone jacks will assist in insulating your machine from any power surge that might travel through a telephone line.
- Press the ON/OFF key on your Brother machine's control panel to verify the machine is powered on.
When the Brother machine is off, its display will be blank.
- If the LCD is still blank, plug the Brother machine into a different known-working electrical outlet at your location.
If the LCD is still blank, your machine may require service. Please contact Brother Customer Service from "Contact Us".
- Verify the power cord is connected to the AC power outlet and the back of the Brother machine.
- If the date and time show on the LCD, go to STEP 6.
- Press the SPEAKER PHONE or HOOK key again.
- If there is a dial tone, go to STEP 6.
- If there is still no dial tone, contact your VoIP provider for assistance.
- If there is a dial tone, go to STEP 6.
- Send a test fax.
- Press the FAX key to illuminate it.
- Verify the Brother machine's LCD displays the date and time.
- Place your document(s) in the Automatic Document Feeder (ADF), top edge first until it touches the roller.
After you put your document(s) in the ADF, the Brother machine's LCD should display the fax-sending options.
- Do one of the following.
- If the display changes, go to STEP f.
- If the LCD continues to display the date and time, go to STEP e.
- If the display changes, go to STEP f.
- If the display continues to show the date and time, verify the documents are between 5.8 and 8.5 inches wide and 5.8 and 14 inches long.
- If the document is less than 5.8 inches wide, the document sensors will not detect the document and the Brother machine will not transmit. The document must be wide enough to reach the sensors to inform the machine there is a document to send. You will need to use a wider sheet of paper.
- If the paper meets the above-listed specifications, the LCD continues to display date and time when you place a document into the ADF, your machine may require service. Please contact Brother Customer Service from "Contact Us".
- If the document is less than 5.8 inches wide, the document sensors will not detect the document and the Brother machine will not transmit. The document must be wide enough to reach the sensors to inform the machine there is a document to send. You will need to use a wider sheet of paper.
- Do one of the following.
- If you are using access numbers for calling cards or long distance security codes, or if you must press 9 to access an outside line and a pause is required between the dialing of those numbers and the fax number, be sure to use the REDIAL/PAUSE key to enter pauses where needed.
The REDIAL/PAUSE key will insert a 3.5-second pause between numbers.
You can press the REDIAL/PAUSE key as many times as needed to increase the length of the pause.
- If you are not dialing 9 to access an outside line, or using access numbers for calling cards or long-distance security codes, go STEP g.
- If you are using access numbers for calling cards or long distance security codes, or if you must press 9 to access an outside line and a pause is required between the dialing of those numbers and the fax number, be sure to use the REDIAL/PAUSE key to enter pauses where needed.
- Dial the fax number.
You can manually dial the number or use a Speed Dial number.
- Press the blue key labeled BLACK START or the green key labeled COLOR START on the Brother machine.
When sending a fax manually by pressing the SPEAKER PHONE or HOOK key to listen for a dial tone before dialing, make sure you wait until you hear the receiving fax machine's fax tones before you press the blue key labeled BLACK START or the green key labeled COLOR START on the Brother machine.
If you are having a problem sending a fax to one particular number, make sure it is a working fax number. To do this, press the SPEAKER PHONE or HOOK key and dial the number. Verify the number answers with fax tones.
- Press the FAX key to illuminate it.
- Your Brother machine does not support the use of VoIP, but there is a Compatibility setting available with this machine that may assist with sending and receiving faxes when using VoIP by lowering your Brother machine's modem speed. To adjust the Compatibility setting, follow these steps.
- Press MENU/SET, 2 (Fax), 0 (Miscellaneous), 1 (Compatibility).
- Press the UP OR DOWN ARROW key to select Basic.
- Press the MENU/SET key.
- Press the STOP/EXIT key.
When you change the Compatibility to Basic, Error Correction Mode (ECM) feature is only available for color fax sending. - Press MENU/SET, 2 (Fax), 0 (Miscellaneous), 1 (Compatibility).
- In addition to lowering the modem speed, keep in mind there are many environmental parameters that can also affect faxing over VoIP. (Faxing over VoIP is an internet application.)
- Verify that no other applications or computers are downloading files.
While VoIP operates separately from the computer and they do not normally interfere with each other, the amount of data that can be transmitted from all devices on the system at one time is limited. If a fax is being sent or received and a computer begins downloading, it will consume bandwidth and could prevent the fax from going through.
- Test by sending a fax.
If the fax is not sent successfully, try sending the fax again at an "off-peak" time.
If you have ever noticed a website that typically loads quickly taking a long time to load, then you have experienced network congestion. This can happen when you try to fax over VoIP. Data packets may get delayed, and since fax machines are time-sensitive, the transmission may time out. You may be able to avoid this by resending a fax later.
- If you continue to have problems sending faxes, we recommend you contact your VoIP provider for assistance. They may be able to optimize the network settings for fax transmission.
- Verify that no other applications or computers are downloading files.
FAX-2440C, MFC-210C, MFC-420CN, MFC-5440CN, MFC-5840CN, MFC-620CN, MFC-640CW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.