LS2300PRW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_ls2300eus.jpg)
LS2300PRW
Date: 02/26/2009 ID: faqh00000095_003
How do I clean the bobbin case?
- Remove the power plug from the outlet.
- Raise the needle to its highest position, pull the latch and remove the bobbin case.
- Slide the latch levers out from the retaining ring.
- Remove the retaining ring.
- Remove the hook by grasping the center post and pulling out.
Note it’s position related to the driver.
- Remove any accumulated lint and thread with a brush.
Clean the lint from the shuttle hook using a cloth dampened with machine oil.
- Grasp the center post of the hook, match the hook position opposite the driver and insert.
- Insert the retaining ring with the notch up.
- Push the latch levers into their locked position.Replace the bobbin cace.
LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS2250PRW, LS2300PRW, LS2350, LS2400, LS-30, LX2375, LX3014, LX-3125/3125E, PS-21, VX3240, XL-5130/5232/5340, XL-5500, XL-5600, XL-5700
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.