3034D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_3034deus.jpg)
3034D
Date: 01/24/2014 ID: faqh00000510_000
Threading the upper looper
Run the thread in the sequence illustrated, following the green color and the numbers next to each threading point.
-
Open the front cover by sliding to the right and guiding the top toward you.
-
Pull the thread off the spool and directly up through the thread holder
and the thread plate
on the thread tree from back to front.
-
Pass the thread thourgh the hole
on the top of machine.
Pass the thread through the tension disc
which is in the channel next to the green tension adjustment dial.
-
Guide the thread down the channel and pass the thread through the threading points
next to the green color marks following the numerical order in the accompanying illustration.
Make sure to thread only through the upper thread take up
.
-
Pass the thread through the eye of the upper looper
.
If the upper looper thread breaks during sewing:
This may be caused by the lower looper thread getting caught on the upper looper.If this happens, lower the upperlooper by turning the hand wheel, remove the lower looper thread from the upper looper, and re-thread the upper looper from at least the tension disc.
3034D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.