Innov-is NS2850D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovns2850deus.jpg)
Innov-is NS2850D
Date: 02/02/2024 ID: faqh00101118_005
How to set up the wireless network connection with the wizard on the machine
Introduction
Operations available with a wireless network connection
This machine supports a wireless network connection. The following useful operations will be available if the machine is connected to a wireless network.
Design Database Transfer
-
Wirelessly transfer an embroidery pattern from your computer to the machine by using the dedicated Windows application (Design Database Transfer).
The application can be downloaded from the web page.Click here to visit the page for Design Database Transfer information.
- Settings must be specified in Design Database Transfer. For more information, refer to the manual for Design Database Transfer.
PE-DESIGN
-
Wirelessly transfer to the machine an embroidery pattern edited with embroidery editing software (PEDESIGN version 11 or later) on a computer. Also, transfer to PE-DESIGN an embroidery pattern edited on the machine.
- Settings must be specified in PE-DESIGN. For more information, refer to the manual for PE-DESIGN.
Artspira App
-
You can transfer content published on Artspira App to the embroidery machine and enjoy creating original works using the functions on the app. For more information about the app, refer to the following web page.
Click here to visit the page for Brother Artspira App information.
Updating your machine’s software
-
When an updated version of the software is available on our website, the wireless LAN key appears as
.
Requirements for a Wireless Network Connection
The wireless network connection complies with IEEE 802.11b/g/n standards and uses the 2.4 GHz frequency.
A wireless network cannot be set up with WPA/WPA2 Enterprise.
Setting up the wireless network connection
In order to set up the wireless network connection, we recommend the method that uses the wizard on this machine.
1. Before setting up
In order to connect your machine to a wireless network, the security information (SSID and network key) for your home network will be required. The network key may also be called a password, security key or encryption key. First, find your security information and note it.
SSID | Network Key (Password) |
---|---|
The wireless network connection cannot be set up if you do not have the security information.
Find the security information for your home network as noted below
-
See the side of your home network access point/router. The information may be listed on the label on the network access point/router.
- (1) SSID
- (2) Network Password (Key)
* The illustration shown above is an example.
- Check the manual provided with your home network.
- The default SSID may be the manufacturer's name or the model name.
If you cannot find the security information, contact the manufacturer of the router, your network administrator or your Internet provider.
* Some SSIDs and network keys (passwords) may be case sensitive.
2. Specifying wireless network connection settings
-
Touch
.
,
-
Set [Wireless LAN Enable] to ON.
3. Using the wizard to set up the wireless network connection
There are multiple ways to set up the wireless network connection. We recommend the method that uses the wizard on this machine.
-
Touch
beside [Wireless LAN Setup Wizard].
-
Select your SSID.
,
-
When displaying next or previous pages, touch
(Previous page key) or
(Next page key).
-
If the desired SSID is not listed, specify it as described below.
-
Touch [New SSID] key in the end of the SSID list.
-
Enter the desired SSID, and then press OK key.
-
Select the authentication method and encryption mode.
- Follow steps indicated on the screen.
-
Touch [New SSID] key in the end of the SSID list.
-
If using a previous connection, press [Saved SSID] key and then select the saved SSID.
,
-
When displaying next or previous pages, touch
-
Enter the network key (password), and then touch OK key.
(1) Text input area
(2) Character keys
(3) Caps key
(4) Space key
(5) Letters/numbers/symbols key
(6) Cursor keys (Move the cursor to the left or right.)
(7) Backspace key (Deletes the character at the cursor's position.)
(8) OK key -
When the message "Apply Settings?" appears, touch OK key.
-
Touch OK key to exit the setup.
-
Use the Machine name on page 10 of the settings screen for the wireless LAN function.
-
Use the Machine name on page 10 of the settings screen for the wireless LAN function.
-
While connected, the signal strength can be confirmed by the wireless LAN key in the lower right of the stitch or pattern type selection screen.
,
Strong signal Medium signal Weak signal No signal - Once a wireless network connection has been set up, a wireless network connection will be established each time the machine is turned on. However, [Wireless LAN Enable] in the wireless LAN settings screen must remain set to ON.
Related FAQs
Innov-is NS2850D, SE2000
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.