FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_600eas.jpg)
PR-600/600C
71 Results
1.
How to set up the cap frame driver. [Video instructions]
2.
How to set up the cap frame. [Video instructions]
3.
How do I thread the needle. [Video instructions]
4.
How do I thread my machine (Threading the upper thread). [Video instructions]
5.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
6.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
7.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
8.
Why won't the tension set on my sewing machine?
9.
Maintenance (Oiling the machine)
10.
Why is the outline sewing off the pattern?
11.
Fabric and Thread
12.
"Unknown data format." message appearing on the LCD. What does it mean and how do I clear it?
13.
"Floppy disk write protect." message appearing on the LCD. What does it mean and how do I clear it?
14.
How do I thread the machine? (Threading the upper thread)
15.
How do I confirm Windows98SE?
16.
"This pattern contains too much data to be stored." message appearing on the LCD. What does it mean and how do I clear it?
17.
"Floppy disk was changed." message appearing on the LCD. What does it mean and how do I clear it?
18.
How do I install the bobbin wound with thread
19.
Place a spool of thread on a spool pin
20.
"Needle threader is in threading position." message appearing on the LCD. What does it mean and how do I clear it?
21.
"USB read error." message appearing on the LCD. What does it mean and how do I clear it?
22.
"Can not use this card." message appearing on the LCD. What does it mean and how do I clear it?
23.
"Check if thread is broken." message appearing on the LCD. What does it mean and how do I clear it?
24.
Fabric/stabilizer compatibility chart
25.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
26.
How do I create a space between characters?
27.
"This file cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
28.
"Change to the big frame." message appearing on the LCD. What does it mean and how do I clear it?
29.
"Picker error." message appearing on the LCD. What does it mean and how do I clear it?
30.
Embroidery