FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8060eas.jpg)
CS-8060
39 Results
1.
Combination of fabric, thread and needle
2.
Fabric and Thread
3.
It is difficult to pass the thread through the needle bar thread guide(hook).
4.
Where do I put the oil in my machine?
5.
How do I remove the presser foot holder?
6.
An "E2" message appears on the panel.
7.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
8.
Place a spool of thread on a spool pin.
9.
When thread got tangled.
10.
Why does my thread keep jamming?
11.
Why does the upper thread keep breaking?
12.
Why does the lower thread keep breaking?
13.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
14.
How do I sew buttonholes?
15.
How do I wind the bobbin?
16.
The thread tension is incorrect.
17.
How do I sew such as vinyl, leather, quilting layers and velvet?
18.
An "E4" message appears on the panel.
19.
An "E1" message appears on the panel.
20.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
21.
How do I manually thread the needle?
22.
How do I thread the needle?
23.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.
24.
Why does the needle keep breaking?
25.
How do I sew a blind hem?
26.
When should I use the extra spool pin?
27.
How to I attach the spool of thread to my machine?
28.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
29.
An "E5" message appears on the panel.
30.
How do I sew an applique?