FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8120eas.jpg)
CS-8120
42 Results
1.
Where do I put the oil in my machine?
2.
Combination of fabric, thread and needle
3.
When thread got tangled.
4.
Fabric and Thread
5.
Place a spool of thread on a spool pin.
6.
Why does the lower thread keep breaking?
7.
How do I sew such as vinyl, leather, quilting layers and velvet?
8.
How do I remove the presser foot holder?
9.
How do I manually thread the needle?
10.
"Press needle position button to raise needle." appears on the LCD.
11.
"Saving..." message appearing on the LCD. What does it mean?
12.
Why does the upper thread keep breaking?
13.
How do I load the spool into the thread cassette?
14.
It is difficult to pass the thread through the needle bar thread guide(hook).
15.
"Change to the single needle mode." appears on the LCD.
16.
"Lift the buttonhole lever." appears on the LCD.
17.
Why does my thread keep jamming?
18.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
19.
"Lower the buttonhole lever." appears on the LCD.
20.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
21.
"The safety device has been activated." appears on the LCD.
22.
When should I use the extra spool pin?
23.
How do I thread the needle?
24.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
25.
"Can not change." message appearing on the LCD. What does it mean?
26.
"Disconnect the foot control." appears on the LCD.
27.
"Insert thread cassette." message appearing on the LCD. What does it mean?
28.
Why does the needle keep breaking?
29.
How do I sew buttonholes?
30.
How do I wind the bobbin?