FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov700e_2eas.jpg)
Innov-is 700EII
45 Results
1.
Place a spool of thread on a spool pin.
2.
Where do I put the oil in my machine?
3.
How do I save often-used patterns in the machine's memory?
4.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
5.
How do I clean the race?
6.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
7.
How do I attach the embroidery frame?
8.
How do I correctly install a bobbin?
9.
F** or "F*" appears on the LCD. What does it mean?
10.
How do I wind the bobbin?
11.
"Lower the presser foot lever." appears on the LCD.
12.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
13.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
14.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
15.
How do I adjust a bobbin case using an embroidery pattern?
16.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
17.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
18.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
19.
How do I select patterns from the embroidery cards (sold separately)?
20.
Why is the outline sewing off the pattern?
21.
Upper threading (Point)
22.
When thread got tangled.
23.
Upper Threading (Threading the upper thread)
24.
It is difficult to pass the thread through the needle bar thread guide(hook).
25.
How do I create a space between characters?
26.
How do I recall a specific embroidery pattern from the computer?
27.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
28.
Fabrics and stabilizer material for embroidery
29.
Embroidery
30.
"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?