FAQs & Troubleshooting
Popular |
Innov-is 700E
43 Results
1.
How do I clean the race?
2.
When thread got tangled.
3.
"The safety device has been activated." appears on the LCD.
4.
Where do I put the oil in my machine?
5.
It is difficult to pass the thread through the needle bar thread guide(hook).
6.
F** or "F*" appears on the LCD. What does it mean?
7.
Upper Threading (Threading the upper thread)
8.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
9.
How do I adjust a bobbin case using an embroidery pattern?
10.
Embroidery
11.
"Deleting..." message appearing on the LCD. What does it mean?
12.
Upper threading (Point)
13.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
14.
How do I attach the embroidery frame?
15.
How do I correctly install a bobbin?
16.
How do I wind the bobbin?
17.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
18.
"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
19.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
20.
Fabrics and stabilizer material for embroidery
21.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
22.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
23.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
24.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
25.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
26.
"Saving..." message appearing on the LCD. What does it mean?
27.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
28.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
29.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
30.
How do I select patterns from the embroidery cards (sold separately)?