FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov750deas.jpg)
Innov-is 750D
45 Results
1.
It is difficult to pass the thread through the needle bar thread guide(hook).
2.
Embroidery
3.
How do I clean the race?
4.
Place a spool of thread on a spool pin.
5.
How do I attach the embroidery frame?
6.
Where do I put the oil in my machine?
7.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
8.
When thread got tangled.
9.
How do I save often-used patterns in the machine's memory?
10.
"Saving..." message appearing on the LCD. What does it mean?
11.
How do I select patterns from the embroidery cards (sold separately)?
12.
How do I adjust a bobbin case using an embroidery pattern?
13.
Upper Threading (Threading the upper thread)
14.
How do I create a space between characters?
15.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
16.
"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
17.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
18.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
19.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
20.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
21.
How do I confirm Windows98SE?
22.
Why does the lower thread keep breaking?
23.
F** or "F*" appears on the LCD. What does it mean?
24.
"Lower the presser foot lever." appears on the LCD.
25.
How do I recall a specific embroidery pattern from the computer?
26.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
27.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
28.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
29.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
30.
"Winding bobbin thread." message appearing on the LCD. What does it mean?