FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov90eeas.jpg)
Innov-is 90E
36 Results
1.
It is difficult to pass the thread through the needle bar thread guide(hook).
2.
How do I retrieve a specific embroidery pattern from the computer?
3.
When thread got tangled.
4.
Where do I put the oil in my machine?
5.
Upper threading (Point)
6.
Embroidery
7.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
8.
How do I clean the race?
9.
Place a spool of thread on a spool pin.
10.
F** or "F*" appears on the LCD. What does it mean?
11.
"Lower the presser foot lever." appears on the LCD.
12.
"The safety device has been activated." appears on the LCD.
13.
How do I save often-used patterns in the machine's memory?
14.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
15.
"Deleting..." message appearing on the LCD. What does it mean?
16.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
17.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
18.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
19.
How do I select patterns from the embroidery cards (sold separately)?
20.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
21.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
22.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
23.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
24.
Why is the outline sewing off the pattern?
25.
Why does the lower thread keep breaking?
26.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
27.
"This pattern cannot be used." message appearing on the LCD. What does it mean?
28.
"Saving..." message appearing on the LCD. What does it mean?
29.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
30.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?