FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovm330eeas.jpg)
Innov-is M330E
101 Results
1.
How do I adjust the sensitivity of the operation keys?
2.
Tutorial videos on how to use the machine [Video instructions]
3.
How do I wind the bobbin?
4.
Touch panel is malfunctioning.
5.
How do I thread the machine (Threading the upper thread)?
6.
The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
7.
"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
8.
How do I change the needle ?
9.
The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
10.
Data cannot be saved to the machine
11.
Data cannot be transferred even though the machine number has been input. (M5622201)
12.
How do I adjust thread tension for embroidering?
13.
How do I remove or attach the Embroidery foot ?
14.
How do I set the bobbin?
15.
"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
16.
Stitches are skipped
17.
The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
18.
"F07" appears on the LCD. What does it mean?
19.
"F03" appears on the LCD. What does it mean?
20.
How do I hoop the fabric in the embroidery frame?
21.
Embroidery
22.
How to disconnect the machine from Artspira using the Artspira app
23.
Data cannot be saved to a USB flash drive
24.
"F05" appears on the LCD. What does it mean?
25.
It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
26.
Where do I put the oil in my machine?
27.
How do I clean the race?
28.
M4345001 appears on the Artspira app screen.
29.
How to connect your machine and transfer data to Artspira
30.
M6331001 appears on the Artspira app screen.