FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3eas.jpg)
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
5.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
6.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
7.
Where do I put the oil in my machine?
8.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
9.
How do I clean the race?
10.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
11.
How do I attach or remove the Embroidery Unit?
12.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
13.
"Set the clock." message appears on the LCD. What does it mean?
14.
How do I set the bobbin ?
15.
How do I change the volume of operation sounds or alarm sounds?
16.
"This USB media is incompatible." message appears on the LCD. What does it mean?
17.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
18.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
19.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
20.
How do I adjust the clock on the display?
21.
How do I change the needle ?
22.
How do I wind the bobbin?
23.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
24.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
25.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
26.
How do I attach or remove the embroidery frame ?
27.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
28.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
29.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
30.
Why is the outline sewing off the pattern?