FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3leeas.jpg)
Innov-is V3 LE
57 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
2.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
3.
How to use the Multi-purpose Screwdriver.
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
6.
"Preventive maintenance is recommended" appears on the LCD.
7.
Where do I put the oil in my machine?
8.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
9.
How do I clean the race?
10.
Embroidery
11.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
12.
How do I set the bobbin ?
13.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
14.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
15.
Why does the lower thread keep breaking?
16.
"This file cannot be used." message appears on the LCD. What does it mean?
17.
"Set the clock." message appears on the LCD. What does it mean?
18.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
19.
Upper threading (Point)
20.
How do I attach or remove the Embroidery Unit?
21.
"This USB media cannot be used." message appears on the LCD. What does it mean?
22.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
23.
Why is the outline sewing off the pattern?
24.
"Failed to save file." message appears on the LCD. What does it mean?
25.
"This USB media is incompatible." message appears on the LCD. What does it mean?
26.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
27.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
28.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
29.
"Transmitting by USB" message appears on the LCD. What does it mean?
30.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?