FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3seeas.jpg)
Innov-is V3 SE
57 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
4.
Where do I put the oil in my machine?
5.
"Preventive maintenance is recommended" appears on the LCD.
6.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
7.
How do I clean the race?
8.
Embroidery
9.
How do I wind the bobbin?
10.
How do I remove or attach the Embroidery foot ?
11.
How do I attach or remove the Embroidery Unit?
12.
How do I adjust the clock on the display?
13.
Upper threading (Point)
14.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
15.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
16.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
17.
How do I attach or remove the embroidery frame ?
18.
How do I change the needle ?
19.
How do I set the bobbin ?
20.
"This USB media is incompatible." message appears on the LCD. What does it mean?
21.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
22.
How do I thread my machine ?
23.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
24.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
25.
When thread got tangled.
26.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
27.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
28.
"Set the clock." message appears on the LCD. What does it mean?
29.
Why is the outline sewing off the pattern?
30.
Why does the lower thread keep breaking?