1.

Fabric and Thread

2.

How to use the Multi-purpose Screwdriver. [ Position “3” ]

3.

How do I sew hook-and-loop fasteners(hook-and-loop tapes)?

4.

How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]

5.

How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]

6.

How do I create a space between characters?

7.

Combination of fabric, thread and needle

8.

The bobbin thread cannot be pulled up.

9.

How to use the Multi-purpose Screwdriver. [ Position “2” ]

10.

How to use the Multi-purpose Screwdriver.

11.

How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]

12.

Why does the lower thread keep breaking?

13.

How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]

14.

How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]

15.

How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]

16.

Where do I put the oil in my machine?

17.

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

18.

When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.

19.

How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]

20.

How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]

21.

How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]

22.

How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]

23.

How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]

24.

How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]

25.

How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]

26.

When thread got tangled.

27.

How do I thread my machine when using the twin needle mode ?

28.

"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?

29.

"This USB media is incompatible." message appears on the LCD. What does it mean?

30.

Why does the needle keep breaking?