FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovve2200eas.jpg)
Innov-is VE2200
68 Results
1.
How to use the Multi-purpose Screwdriver.
2.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
3.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
4.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
5.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
6.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
7.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
8.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
9.
How do I thread my machine ?
10.
How do I create a space between characters?
11.
"This USB media is incompatible." message appears on the LCD. What does it mean?
12.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
13.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
14.
"Preventive maintenance is recommended" appears on the LCD.
15.
When thread got tangled.
16.
If the thread breaks during sewing.
17.
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
18.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
19.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
20.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
21.
Why is the outline sewing off the pattern?
22.
Upper threading (Point)
23.
"This file cannot be used." message appears on the LCD. What does it mean?
24.
"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
25.
How do I remove or attach the Embroidery foot ?
26.
How do I change the needle ?
27.
How do I set the bobbin ?
28.
How do I wind the bobbin?
29.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
30.
Embroidery