FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovve2300eas.jpg)
Innov-is VE2300
67 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
2.
How to use the Multi-purpose Screwdriver.
3.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
6.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
7.
"Preventive maintenance is recommended" appears on the LCD.
8.
Where do I put the oil in my machine?
9.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
10.
How do I clean the race?
11.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
12.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
13.
How do I set the bobbin ?
14.
"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
15.
"Set the clock." message appears on the LCD. What does it mean?
16.
How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
17.
How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
18.
If the thread breaks during sewing.
19.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
20.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
21.
"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
22.
How do I change the volume of operation sounds or alarm sounds?
23.
How do I attach or remove the embroidery frame ?
24.
How do I attach or remove the Embroidery Unit?
25.
How do I adjust the clock on the display?
26.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
27.
"This USB media cannot be used." message appears on the LCD. What does it mean?
28.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
29.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
30.
"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?