FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pe150veas.jpg)
PE-150V
35 Results
1.
Place a spool of thread on a spool pin.
2.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
3.
It is difficult to pass the thread through the needle bar thread guide(hook).
4.
Embroidery
5.
Where do I put the oil in my machine?
6.
Upper threading (Point)
7.
Why does the lower thread keep breaking?
8.
Upper Threading
9.
When thread got tangled.
10.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
11.
How do I wind the bobbin?
12.
How do I create a space between characters?
13.
"Calculating. Please wait." message appearing on the LCD. What does it mean?
14.
Why is the outline sewing off the pattern?
15.
How do I correctly install a bobbin?
16.
"Saving" message appearing on the LCD. What does it mean?
17.
"Embroidery pattern is exceeding sewing area." message appearing on the LCD. What does it mean?
18.
"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?
19.
"This pattern is stored in other embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
20.
Fabrics and stabilizer material for embroidery
21.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
22.
"Calculating cannot be done halfway through." message appearing on the LCD. What does it mean?
23.
"Complete pattern entry." message appearing on the LCD. What does it mean?
24.
"This pattern can not be saved in the memory." message appearing on the LCD. What does it mean?
25.
"Lower the presser foot lever." appears on the LCD.
26.
"Raise the presser foot and re-thread." message appearing on the LCD. What does it mean and how do I clear it?
27.
"Color cannot be changed halfway." message appearing on the LCD. What does it mean?
28.
"Embroidery card is not inserted. Turn off main power and insert card." message appearing on the LCD. What does it mean?
29.
"No pattern is memorized." message appearing on the LCD. What does it mean?
30.
"Check if thread is entangled. Check if needle is bent." message appearing on the LCD. What does it mean?