FAQs & Troubleshooting
Popular |
PE-190D
35 Results
1.
Place a spool of thread on a spool pin.
2.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
3.
Embroidery
4.
Where do I put the oil in my machine?
5.
It is difficult to pass the thread through the needle bar thread guide(hook).
6.
"Embroidery card is not inserted. Turn off main power and insert card." message appearing on the LCD. What does it mean?
7.
"Select pattern." message appearing on the LCD. What does it mean?
8.
When thread got tangled.
9.
How do I create a space between characters?
10.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
11.
"Raise the presser foot and re-thread." message appearing on the LCD. What does it mean and how do I clear it?
12.
Upper threading (Point)
13.
"Calculating. Please wait." message appearing on the LCD. What does it mean?
14.
"Calculating cannot be done halfway through." message appearing on the LCD. What does it mean?
15.
"Complete pattern entry." message appearing on the LCD. What does it mean?
16.
"No pattern is memorized." message appearing on the LCD. What does it mean?
17.
"Check if thread is entangled. Check if needle is bent." message appearing on the LCD. What does it mean?
18.
Why is the outline sewing off the pattern?
19.
Why does the lower thread keep breaking?
20.
Fabrics and stabilizer material for embroidery
21.
How do I correctly install a bobbin?
22.
Upper Threading
23.
How do I use the needle threader?
24.
How do I wind the bobbin?
25.
"Lower the presser foot lever." appears on the LCD.
26.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
27.
"Saving" message appearing on the LCD. What does it mean?
28.
"Color cannot be changed halfway." message appearing on the LCD. What does it mean?
29.
"Raise the needle to high position." message appearing on the LCD. What does it mean?
30.
"Embroidery pattern is exceeding sewing area." message appearing on the LCD. What does it mean?