FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pe830dleas.jpg)
PE830DL
49 Results
1.
How do I adjust thread tension for embroidering?
2.
Tutorial videos on how to use the machine [Video instructions]
3.
How do I adjust the sensitivity of the operation keys?
4.
How do I hoop the fabric in the embroidery frame?
5.
Embroidery
6.
How do I retrieve the patterns from the machine’s memory?
7.
Fabric puckers
8.
How do I save the embroidery patterns in the machine’s memory?
9.
"Preventive maintenance is recommended" appears on the LCD.
10.
How do I clean the race?
11.
Stitches are skipped
12.
How do I enter a line feed in the embroidery pattern?
13.
How do I edit a single letter in the embroidery pattern?
14.
How do I thread the machine (Threading the upper thread)?
15.
"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
16.
How do I change the needle ?
17.
How do I set the bobbin ?
18.
"This USB media cannot be used." message appears on the LCD. What does it mean?
19.
How do I change the font type in the embroidery pattern?
20.
"Not enough available memory to save." message appears on the LCD. What does it mean?
21.
Where do I put the oil in my machine?
22.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
23.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
24.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
25.
Needle breaks.
26.
Bobbin thread breaks
27.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
28.
"USB media error" message appears on the LCD. What does it mean?
29.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
30.
"Check and rethread the upper thread." message appears on the LCD. What does it mean?