FAQs & Troubleshooting
Popular |
SuperGalaxie 3000/3100D
75 Results
1.
Combination of fabric, thread and needle
2.
When thread got tangled.
3.
Place a spool of thread on a spool pin.
4.
Where do I put the oil in my machine?
5.
Fabric and Thread
6.
How do I create a space between characters?
7.
"Saving..." message appearing on the LCD. What does it mean?
8.
"The pattern is too large for the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
9.
"The needle is down. Press the needle position button to raise the needle." message appearing on the LCD. What does it mean and how do I clear it?
10.
"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
11.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
12.
"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?
13.
"Select a pattern." message appearing on the LCD. What does it mean and how do I clear it?
14.
Embroidery
15.
"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?
16.
"This disk is write protected. Can not delete the pattern. Disengage the write protection and try to delete again." message appearing on the LCD. What does it mean and how do I clear it?
17.
"This disk is write protected. Can not save the pattern. Disengage the write protection and save again." message appearing on the LCD. What does it mean and how do I clear it?
18.
"Change to the medium or large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
19.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
20.
The thread tension is incorrect.
21.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
22.
"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
23.
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
24.
Why is the outline sewing off the pattern?
25.
Why does the needle keep breaking?
26.
It is difficult to pass the thread through the needle bar thread guide(hook).
27.
"Formatting the floppy disk." message appearing on the LCD. What does it mean?
28.
"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." message appearing on the LCD. What does it mean and how do I clear it?
29.
"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?
30.
"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?