FAQs & Troubleshooting
![]() |
Popular |
94 Results
1.
How to Embroider on Pet Collar. [Video instructions]
2.
How to set up the cap frame. [Video instructions]
3.
How to Embroider on Shoes. [Video instructions]
4.
Creating Beautiful Embroidery ( Hooping techniques )
5.
How to Embroider on Cap. [Video instructions]
6.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
7.
The thread tension is incorrect.
8.
Color thread table
9.
How to Embroider on Bag. [Video instructions]
10.
Loops appear on the surface of the fabric when embroidering.
11.
How do I use the embroidery sheet ?
12.
Colors of Tajima (.dst) embroidery data
13.
How to set up the cap frame driver. [Video instructions]
14.
The needle threader cannot be used.
15.
How do I wind the bobbin?
16.
Embroidery pattern does not sew out correctly.
17.
"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
18.
How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
19.
Maintenance (Oiling the machine)
20.
"Preventive maintenance is recommended" appears on the LCD.
21.
How to select the "Eco Mode" or "Shutoff Support Mode" ?
22.
Why does the upper thread keep breaking?
23.
How do I thread the machine? (Threading the upper thread)
24.
How do I install the bobbin wound with thread?
25.
Fabric/stabilizer compatibility chart
26.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
27.
The upper thread does not reach the bobbin thread when embroidering begins.
28.
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
29.
"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
30.
How do I change the needle?