FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs10euk.jpg)
CS10
70 Results
1.
The bobbin thread cannot be pulled up.
2.
How do I clean the machine? (Cleaning the race)
3.
Combination of fabric, thread and needle
4.
The machine does not make stitches
5.
Where do I put the oil in my machine?
6.
Upper threading [Video instructions]
7.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
8.
How do I thread my machine? (For models equipped with the needle threader)
9.
Why does the lower thread keep breaking?
10.
Place a spool of thread on a spool pin.
11.
Overcasting [Video instructions]
12.
Thread tension [Video instructions]
13.
Fabric and Thread
14.
How do I install the bobbin wound with thread? (For models equipped with the quick-set bobbin)
15.
Reverse sewing [Video instructions]
16.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
17.
How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
18.
How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
19.
When thread got tangled.
20.
Tangled thread on wrong side of fabric
21.
Incorrect thread tension
22.
Upper thread tightened up
23.
How do I change the needle ?
24.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
25.
An "E3" message appears on the panel.
26.
An "E2" message appears on the panel.
27.
The thread tension is incorrect.
28.
Why does the upper thread keep breaking?
29.
Upper threading (Point)
30.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]