FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov27seeuk.jpg)
Innov-is 27SE
74 Results
1.
Combination of fabric, thread and needle
2.
When thread got tangled.
3.
Fabric and Thread
4.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
5.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
6.
Why does the lower thread keep breaking?
7.
How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
8.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
9.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
10.
It is difficult to pass the thread through the needle bar thread guide(hook).
11.
How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
12.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
13.
How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
14.
Place a spool of thread on a spool pin.
15.
Upper thread tightened up
16.
How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
17.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
18.
How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
19.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
20.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
21.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
22.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
23.
Replacing the presser foot
24.
How do I wind the bobbin?
25.
An "E6" message appears on the panel.
26.
The thread tension is incorrect.
27.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
28.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
29.
How do I remove or attach the presser foot holder?
30.
Incorrect thread tension