FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovm240edeuk.jpg)
Innov-is M240ED
56 Results
1.
Basic operations and embroidery functions [Video instructions]
2.
Touch panel is malfunctioning.
3.
How to use the memory function to save embroidery patterns
4.
Where do I put the oil in my machine?
5.
How do I set the bobbin?
6.
"Preventive maintenance is recommended." ppears on the LCD.
7.
"F07" appears on the LCD. What does it mean?
8.
It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
9.
How do I hoop the fabric in the embroidery frame?
10.
How do I adjust the sensitivity of the operation keys?
11.
How do I wind the bobbin?
12.
How do I change the needle ?
13.
How do I remove or attach the Embroidery foot ?
14.
How do I adjust thread tension for embroidering?
15.
"This pattern cannot be used." message appears on the LCD. What does it mean?
16.
"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
17.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
18.
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
19.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
20.
How do I thread the machine (Threading the upper thread)?
21.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
22.
Bobbin thread breaks
23.
"Not enough available memory to save." message appears on the LCD. What does it mean?
24.
Upper thread breaks.
25.
Fabric puckers
26.
Tips for getting better embroidery results
27.
"F03" appears on the LCD. What does it mean?
28.
How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
29.
When the thread became tangled under the bobbin winder seat
30.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?