FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3euk.jpg)
Innov-is V3
58 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
2.
How to use the Multi-purpose Screwdriver.
3.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
4.
How do I clean the race?
5.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
6.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
7.
"Preventive maintenance is recommended" appears on the LCD.
8.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
9.
Where do I put the oil in my machine?
10.
Embroidery
11.
"Set the clock." message appears on the LCD. What does it mean?
12.
How do I change the needle ?
13.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
14.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
15.
Upper threading (Point)
16.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
17.
"This file cannot be used." message appears on the LCD. What does it mean?
18.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
19.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
20.
How do I attach or remove the Embroidery Unit?
21.
How do I thread my machine ?
22.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
23.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
24.
When thread got tangled.
25.
If the thread breaks during sewing.
26.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
27.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
28.
How do I remove or attach the Embroidery foot ?
29.
How do I wind the bobbin?
30.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?