FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovv3seeuk.jpg)
Innov-is V3 SE
57 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
2.
How do I clean the race?
3.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
4.
How to use the Multi-purpose Screwdriver.
5.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
6.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
7.
Where do I put the oil in my machine?
8.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
9.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
10.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
11.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
12.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
13.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
14.
If the thread breaks during sewing.
15.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
16.
How do I attach or remove the embroidery frame ?
17.
How do I change the needle ?
18.
"Transmitting by USB" message appears on the LCD. What does it mean?
19.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
20.
Fabrics and stabilizer material for embroidery
21.
"This file cannot be used." message appears on the LCD. What does it mean?
22.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
23.
"Failed to save file." message appears on the LCD. What does it mean?
24.
How do I attach or remove the Embroidery Unit?
25.
How do I thread my machine ?
26.
"This USB media is incompatible." message appears on the LCD. What does it mean?
27.
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
28.
"Lower the presser foot lever." message appears on the LCD. What does it mean?
29.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
30.
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?