FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pe180deuk.jpg)
PE-180D
35 Results
1.
It is difficult to pass the thread through the needle bar thread guide(hook).
2.
Place a spool of thread on a spool pin.
3.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
4.
Where do I put the oil in my machine?
5.
"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean?
6.
Why does the lower thread keep breaking?
7.
When thread got tangled.
8.
"Calculating. Please wait." message appearing on the LCD. What does it mean?
9.
"Raise the presser foot and re-thread." message appearing on the LCD. What does it mean and how do I clear it?
10.
Why is the outline sewing off the pattern?
11.
Upper threading (Point)
12.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
13.
"Complete pattern entry." message appearing on the LCD. What does it mean?
14.
"This pattern can not be saved in the memory." message appearing on the LCD. What does it mean?
15.
Embroidery
16.
How do I correctly install a bobbin?
17.
Upper Threading
18.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
19.
"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?
20.
"This pattern is stored in other embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
21.
Fabrics and stabilizer material for embroidery
22.
How do I use the needle threader?
23.
"Raise the needle to high position." message appearing on the LCD. What does it mean?
24.
"Embroidery card is not inserted. Turn off main power and insert card." message appearing on the LCD. What does it mean?
25.
How do I wind the bobbin?
26.
"Lower the presser foot lever." appears on the LCD.
27.
"Saving" message appearing on the LCD. What does it mean?
28.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
29.
How do I create a space between characters?
30.
"Calculating cannot be done halfway through." message appearing on the LCD. What does it mean?