FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/lptd4650tnwbreuk.jpg)
TD-4650TNWBR
119 Results
1.
An RFID error occurred.
2.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
3.
RFID calibration does not finish or fails. I cannot write RFID tags.
4.
Enable or disable Bluetooth Low Energy (BLE)
5.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
6.
Using the CommTool (for Windows)
7.
How to add a new stock from the Seagull driver
8.
How to transfer the print programs or templates using FBPL commands
9.
The left or right side of the label is not printed correctly.
10.
The printing position of small label is incorrect.
11.
How to adjust the cut position (For Windows)
12.
Update the Bluetooth®/Wi-Fi® module's firmware to use Bluetooth Low Energy (BLE)
13.
How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)
14.
How to connect the printer to your computer (for Windows)
15.
Printing the printer configuration (Self-test)
16.
The time on the printer is incorrect.
17.
How to calibrate the RFID
18.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.
19.
BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.
20.
The LED is lit in red and the printer status from the BPM (Brother Printer Management Tool) shows "Head Open".
21.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
22.
The label wraps around the platen roller when using the cutter.
23.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
24.
How to load the Ribbon
25.
Printing is not possible.
26.
How to install the Windows driver via Bluetooth®
27.
How to load the Media
28.
How do I reset Wi-Fi® setting?
29.
How to get Bluetooth MAC Address with the CommTool (for Windows)
30.
I cannot install the Windows driver.