DC200
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_dc200eus.jpg)
DC200
Sort by
14 Results
1. 12/26/2018
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
2. 10/26/2017
The mat or the material catches on a feed roller during cutting/drawing.
3. 10/24/2017
The material to be cut/drawn peels off during cutting/drawing.
4. 10/24/2017
The material to be cut/drawn cannot be attached to the mat.
5. 10/24/2017
Mat and Material Combinations
6. 10/24/2017
There are deep cuts completely through the mat.
7. 10/24/2017
The mat is fed in at an angle and is not fed during cutting / drawing.
8. 10/24/2017
The mat or the material catches on a feed roller when the mat is being inserted.
9. 10/24/2017
The mat cannot be fed.
10. 10/24/2017
When the mat is inserted, the attached material peels off.
11. 10/24/2017
The mat cannot be fed out.
12. 10/24/2017
The mat is fed in at an angle.
13. 10/24/2017
The mat cannot be recognized.
14. 10/24/2017
The mat cannot be inserted.