Innov-is VM6200D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovvm6200deus.jpg)
Innov-is VM6200D
Sort by
56 Results
1. 07/12/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
2. 07/12/2024
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
3. 07/12/2024
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
4. 07/09/2019
"This key cannot be used at this time." message appears on the LCD. What does it mean?
5. 07/09/2019
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
6. 07/09/2019
"Set the clock." message appears on the LCD. What does it mean?
7. 07/09/2019
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
8. 07/09/2019
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
9. 07/09/2019
"This USB media is incompatible." message appears on the LCD. What does it mean?
10. 07/09/2019
"This USB media cannot be used." message appears on the LCD. What does it mean?
11. 07/09/2019
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
12. 07/09/2019
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
13. 07/09/2019
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
14. 07/09/2019
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
15. 07/09/2019
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
16. 08/06/2018
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
17. 05/02/2018
"This file cannot be used." message appears on the LCD. What does it mean?
18. 07/29/2016
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
19. 07/29/2016
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
20. 07/29/2016
"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
21. 07/29/2016
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
22. 07/29/2016
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
23. 07/29/2016
"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
24. 07/29/2016
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
25. 07/29/2016
"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
26. 07/29/2016
"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
27. 07/29/2016
"Sensor module error." message appears on the LCD. What does it mean?
28. 07/29/2016
"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
29. 07/29/2016
"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
30. 07/29/2016
"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?