Innov-is VQ3000
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovvq3000eus.jpg)
Innov-is VQ3000
Sort by
47 Results
1. 07/12/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
2. 07/12/2024
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
3. 07/12/2024
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
4. 07/09/2019
"This key cannot be used at this time." message appears on the LCD. What does it mean?
5. 07/09/2019
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
6. 07/09/2019
"Set the clock." message appears on the LCD. What does it mean?
7. 07/09/2019
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
8. 07/09/2019
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
9. 07/09/2019
"This USB media is incompatible." message appears on the LCD. What does it mean?
10. 07/09/2019
"This USB media cannot be used." message appears on the LCD. What does it mean?
11. 07/09/2019
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
12. 07/09/2019
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
13. 07/09/2019
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
14. 07/09/2019
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
15. 07/09/2019
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
16. 08/06/2018
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
17. 05/02/2018
"This file cannot be used." message appears on the LCD. What does it mean?
18. 07/29/2016
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
19. 07/29/2016
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
20. 07/29/2016
"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
21. 07/29/2016
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
22. 07/29/2016
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
23. 07/29/2016
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
24. 07/29/2016
"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
25. 07/29/2016
"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
26. 07/29/2016
"Sensor module error." message appears on the LCD. What does it mean?
27. 07/29/2016
"OK to delete the setting?" message appears on the LCD. What does it mean?
28. 07/29/2016
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
29. 07/29/2016
"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
30. 07/29/2016
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?