Innov-is XJ2
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovxj2eus.jpg)
Innov-is XJ2
Sort by
68 Results
1. 07/12/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
2. 07/12/2024
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
3. 07/12/2024
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
4. 07/12/2024
"Attach the embroidery frame." message appears on the LCD. What does it mean?
5. 01/24/2023
"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?
6. 01/24/2023
"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
7. 01/18/2023
"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
8. 09/24/2021
"The SSID and Network Key are incorrect." message appears on the LCD. What does it mean?
9. 09/08/2021
"The wireless setting is not activated." message appears on the LCD. What does it mean?
10. 09/08/2021
"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?
11. 07/09/2019
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
12. 07/09/2019
"Select a stitch." message appears on the LCD. What does it mean?
13. 07/09/2019
"Not enough available memory to save the data. Delete some patterns or use a different media." message appears on the LCD. What does it mean?
14. 07/09/2019
"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
15. 07/09/2019
"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
16. 07/09/2019
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
17. 07/09/2019
"Set the clock." message appears on the LCD. What does it mean?
18. 07/09/2019
"OK to delete the setting?" message appears on the LCD. What does it mean?
19. 07/09/2019
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
20. 07/09/2019
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
21. 07/09/2019
"This USB media is incompatible." message appears on the LCD. What does it mean?
22. 07/09/2019
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
23. 07/09/2019
"This USB media cannot be used." message appears on the LCD. What does it mean?
24. 07/09/2019
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
25. 07/09/2019
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
26. 07/09/2019
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
27. 07/09/2019
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
28. 07/09/2019
"Remove the embroidery frame." message appears on the LCD. What does it mean?
29. 07/09/2019
"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
30. 07/09/2019
"Lower the buttonhole lever." message appears on the LCD. What does it mean?