1. 07/12/2024

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

2. 07/12/2024

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

3. 07/31/2023

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

4. 07/31/2023

"The bobbin thread is almost empty." message appears on the LCD. What does it mean?

5. 01/25/2023

"USB media error" message appears on the LCD. What does it mean?

6. 07/21/2017

"F**" appears on the LCD. What does it mean?

7. 07/21/2017

"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?

8. 07/21/2017

"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?

9. 02/28/2017

"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?

10. 02/28/2017

"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?

11. 02/28/2017

"Turn off the power and replace the needle plate." appears on the LCD.

12. 02/28/2017

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

13. 02/28/2017

"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?

14. 02/28/2017

"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?

15. 02/28/2017

"Raise the buttonhole lever." message appears on the LCD. What does it mean?

16. 02/28/2017

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

17. 12/26/2016

"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?

18. 07/29/2016

"Not enough available memory to save." message appears on the LCD. What does it mean?

19. 07/29/2016

"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?

20. 07/29/2016

"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?

21. 07/29/2016

"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?

22. 07/29/2016

"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?

23. 07/29/2016

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

24. 07/29/2016

"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?

25. 07/29/2016

"This USB media cannot be used." message appears on the LCD. What does it mean?

26. 07/29/2016

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

27. 07/29/2016

"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?

28. 07/29/2016

"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?

29. 07/29/2016

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?

30. 07/29/2016

"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?