FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inov6000d1eus.jpg)
Innov-is 6000D
168 Results
31.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
32.
"This USB media cannot be used." message appears on the LCD. What does it mean?
33.
How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
34.
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
35.
How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
36.
How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
37.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
38.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
39.
The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
40.
Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
41.
How do I recall a specific embroidery pattern from the computer?
42.
How do I remove the presser foot holder?
43.
Embroidery
44.
How do I change the volume of operation sounds or alarm sounds?
45.
How do I thread my machine ?
46.
When thread got tangled.
47.
How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
48.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
49.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
50.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
51.
How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
52.
Sewing is started even though the presser foot is raised.
53.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
54.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
55.
"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
56.
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
57.
How to clean the bobbin case(pink marking or no marking) when using a prewound bobbin.
58.
How do I clean the race?
59.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
60.
"OK to delete the selected picture?" message appears on the LCD. What does it mean?