FAQs & Troubleshooting
Popular |
Innov-is 950D
97 Results
31.
How do I raise or lower the feed dogs?
32.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
33.
Place a spool of thread on a spool pin.
34.
How do I correctly install a bobbin?
35.
How do I thread the needle?
36.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
37.
F** or "F*" appears on the LCD. What does it mean?
38.
How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
39.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
40.
How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
41.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
42.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
43.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
44.
The embroidery cover (the extension table) cannot put on the embroidery unit.
45.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
46.
The thread tension is incorrect.
47.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
48.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
49.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
50.
How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
51.
How do I save often-used patterns in the machine's memory?
52.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
53.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
54.
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
55.
How do I remove the presser foot holder?
56.
Why does my thread keep jamming?
57.
How do I sew buttonholes?
58.
How do I manually thread the needle?
59.
How do I wind the bobbin?
60.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?