FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovvm5200eus.jpg)
Innov-is VM5200
125 Results
31.
How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
32.
How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
33.
How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
34.
How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
35.
Embroidery
36.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
37.
How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
38.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
39.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
40.
The bobbin thread cannot be pulled up.
41.
How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
42.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
43.
How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
44.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
45.
How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
46.
How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
47.
How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
48.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
49.
How do I clean the race?
50.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
51.
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
52.
How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
53.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
54.
How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
55.
How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
56.
How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
57.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
58.
How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
59.
"Lower the buttonhole lever." message appears on the LCD. What does it mean?
60.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?