FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8060eus.jpg)
CS-8060
39 Results
1.
Combination of fabric, thread and needle
2.
"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
3.
An "E3" message appears on the panel.
4.
Fabric and Thread
5.
How do I remove the presser foot holder?
6.
Place a spool of thread on a spool pin.
7.
How do I load the spool into the thread cassette?
8.
How to I attach the spool of thread to my machine?
9.
It is difficult to pass the thread through the needle bar thread guide(hook).
10.
When thread got tangled.
11.
How do I manually thread the needle?
12.
Where do I put the oil in my machine?
13.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
14.
I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
15.
I slide the stitch length adjustment slider, but I can not adjust the stitch length.
16.
Why does the lower thread keep breaking?
17.
How do I thread the needle?
18.
Why does the upper thread keep breaking?
19.
How do I wind the bobbin?
20.
How do I sew buttonholes?
21.
How do I sew a blind hem?
22.
My auto threader is not working. What should I do?
23.
Upper Threading (Using the twin needle)
24.
How do I sew such as vinyl, leather, quilting layers and velvet?
25.
Incorrect thread tension
26.
An "E4" message appears on the panel.
27.
An "E1" message appears on the panel.
28.
How do I sew an applique?
29.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
30.
An "E6" message appears on the panel.