FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_cs8150eus.jpg)
CS-8150
42 Results
1.
Combination of fabric, thread and needle
2.
When should I use the extra spool pin?
3.
Fabric and Thread
4.
When thread got tangled.
5.
Where do I put the oil in my machine?
6.
It is difficult to pass the thread through the needle bar thread guide(hook).
7.
How do I wind the bobbin?
8.
Why does the lower thread keep breaking?
9.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
10.
Place a spool of thread on a spool pin.
11.
How do I remove the presser foot holder?
12.
"Change to the single needle mode." appears on the LCD.
13.
How do I manually thread the needle?
14.
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
15.
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
16.
"Insert thread cassette." message appearing on the LCD. What does it mean?
17.
How do I thread the needle?
18.
Why does the needle keep breaking?
19.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
20.
How to I attach the spool of thread to my machine?
21.
"Lower the buttonhole lever." appears on the LCD.
22.
"Disconnect the foot control." appears on the LCD.
23.
"The safety device has been activated." appears on the LCD.
24.
"Press needle position button to raise needle." appears on the LCD.
25.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
26.
Why does my thread keep jamming?
27.
How do I sew buttonholes?
28.
Upper Threading (Using the twin needle)
29.
How do I load the spool into the thread cassette?
30.
"Lift the buttonhole lever." appears on the LCD.